Eliminate the trouble of chip winding in metal processing, prevent iron chips from winding on parts and tools, and make production more smooth; Improve cutting speed and tap more productivity in production; The tool wear is reduced. Reduce the local temperature generated by high temperature during machining, and extend the tool life; Reduce tool replacement frequency and tool consumption; Improve quality stability and reduce the generation of waste reduction parts; Improve the surface finish of parts, improve the quality of parts, and improve the market competitiveness of products; Advantages of green central water outlet Eliminate the trouble of chip entanglement in metal processing, avoid iron filings entanglement on parts and tools, and make production more smooth. Improve cutting speed and tap more productivity in production. The tool wear is reduced. Reduce the local temperature generated by high temperature during machining, and extend the tool life. Reduce tool replacement frequency and tool consumption. Improve quality stability and reduce the generation of waste reduction parts. Improve the surface finish of parts, improve the quality of parts, and improve the market competitiveness of products. What machine tool uses the center? The types of machine tools that can provide modification services for the spindle water outlet system of the machining center: vertical machining center, machining center, gantry machining center, CNC inclined lathe The internal cold drill and central high-pressure fuel injection are used for deep hole machining of parts, and the production efficiency and finish are further improved. The device has higher use efficiency and more convenient maintenance. Any enclosed machining center and turning and milling center can be connected.

The spindle water outlet system of the machining center can provide refitting services for the machine tool: vertical machining center is referred to as vertical machining center, horizontal machining center is referred to as horizontal machining center, gantry boring and milling machine machining center, CNC inclined lathe, internal cooling drill, force drill, and center high-pressure oil injection are used for deep hole machining of parts to improve the cutting speed and processing production efficiency, and further improve the smoothness. The central water outlet device has higher efficiency and more convenient maintenance. It can connect any closed machining center and turning and milling center.

The specific replacement time mainly depends on the water quality. If the water is clean, the replacement period can be extended appropriately. At the same time, the equipment itself has the backwashing function, which further extends the replacement cycle of the filter element of the filtering system. I list an approximate replacement cycle for reference below, and the replacement frequency should be determined according to the actual situation. 1. PP cotton filter element. It is usually used as a primary filter, mainly to filter large sediment particles and iron pillars, and needs to be replaced after 3 to 6 months of normal use. 2. Granular activated carbon filter element. Usually used as secondary filtration, it is mainly used to adsorb various chemical substances, such as residual chlorine and pesticide residues in tap water. Generally, it needs to be replaced every 6~12 months after normal use. 3. Ultrafiltration membrane filter element. This is an important filter element in the ultrafiltration machine, which is mainly used to filter bacteria in water. Generally, it needs to be replaced after 1~2 years of normal use. 4. RO reverse osmosis membrane filter element. This is an important filter element in the water purifier, with filtering accuracy. Only the water filtered by it has no scale, and the general replacement cycle is 1~3 years. 5. Rear activated carbon filter element. That is, a filter element is mainly used to improve the taste, and the replacement cycle is generally 1~2 years. 6. Front filter. As the front-end equipment of the filtration system, it does not need to be replaced, and impurities can be removed by regular backwashing. 7. High pressure filter. When cleaning the filter under high pressure, just unscrew its cover, take out the filter screen and clean it. In terms of tools, the production is more smooth. Improve cutting speed and tap more productivity in production. The tool wear is reduced. Reduce the local temperature generated by high temperature during machining, and extend the tool life. Reduce tool replacement frequency and tool consumption. Improve quality stability and reduce the generation of waste reduction parts. Improve the surface finish of parts, improve the quality of parts, and improve the market competitiveness of products. What machine tool uses the center? The types of machine tools that can provide modification services for the spindle water outlet system of the machining center: vertical machining center, machining center, gantry machining center, CNC inclined lathe The internal cold drill and central high-pressure fuel injection are used for deep hole machining of parts, and the production efficiency and finish are further improved. The device has higher use efficiency and more convenient maintenance. Any enclosed machining center and turning and milling center can be connected.

The technical scheme adopted is: a central effluent filtering device, which is characterized in that it comprises a water tank, a chip removal water tank, a filtering mechanism, an input pipeline, a connecting pipeline, an output pipeline, a low-pressure delivery pump and a high-pressure delivery pump, and the filtering mechanism comprises a filter and a second filter; One end of the input pipe is connected with the outlet of the waste water recovery channel of the machine tool workbench; The other end of the input pipe is connected with the chip conveyor water tank; Both ends of the connecting pipe are respectively connected with the water tank. The filter and the low-pressure delivery pump are connected and installed on the connecting pipeline. One end of the output pipeline is connected with the water tank, and the other end is connected with the end of the machine tool spindle through a rotary joint; The filter and high-pressure delivery pump are connected and installed on the output pipe. The cooling water in the water tank is delivered to the central through-hole of the main shaft through the high-pressure delivery pump to cool the main shaft. The inclined high-level overflow pipe is connected to the side wall of the water tank, and the bottom end of the high-level overflow pipe is located in the chip cleaning water tank. When the liquid level in the water tank is higher than the top of the high-level overflow pipe, the cooling water will automatically flow into the chip cleaning water tank from the high-level overflow pipe to prevent the water tank from being filled. As a supplement and improvement of the above technical scheme, the utility model also includes the following technical features. The filter is a coarse filter and the second filter is a fine filter. The wastewater recovered from the wastewater recovery channel of the machine tool workbench enters the central through-hole of the spindle through two filters, effectively improving the purity of the cooling water. The wood chip cleaning water tank is separated into two chambers by the filter screen. The input pipe is connected with one chamber, and the connecting pipe and the high-level overflow pipe are connected with the other chamber. The recycled wastewater is filtered by the filter screen first, extending the service life of the filter and the second filter. The central effluent filtering device also includes a liquid level sensor, which is installed in the chip cleaning water tank to detect the liquid level in the chip cleaning water tank. A pressure gauge is connected to the output pipe to detect the pressure of cooling water in the output pipe at any time. By setting a coarse filter and a fine filter, the utility model can achieve the following beneficial effects: 1. The used cooling liquid is filtered twice, the filtering effect of the cooling liquid is good, and the utilization rate of the cooling liquid is improved; 2. Compact structure, small volume, convenient control and low cost. Better production. Improve cutting speed and tap more productivity in production. The tool wear is reduced. Reduce the local temperature generated by high temperature during machining, and extend the tool life. Reduce tool replacement frequency and tool consumption. Improve quality stability and reduce the generation of waste reduction parts. Improve the surface finish of parts, improve the quality of parts, and improve the market competitiveness of products. What machine tool uses the center? The types of machine tools that can provide modification services for the spindle water outlet system of the machining center: vertical machining center, machining center, gantry machining center, CNC inclined lathe The internal cold drill and central high-pressure fuel injection are used for deep hole machining of parts, and the production efficiency and finish are further improved. The device has higher use efficiency and more convenient maintenance. Any enclosed machining center and turning and milling center can be connected.

A large number of practices have proved that every 1 degree change in the workpiece temperature during the processing will result in several micrometers of change within the range of 1 meter. The temperature of iron filings produced in high-speed cutting of workpiece on CNC machining center is up to several hundred degrees. In order to avoid the deformation of the workpiece caused by these high-temperature iron chips falling on the surface of the workpiece, it is necessary to quickly reduce the temperature of the iron chips. Generally, the measure we take is coolant, also called cutting fluid. The selection principle of cutting fluid must meet the requirements of cutting performance and service performance, that is, it should have good lubrication, cooling, rust prevention and cleaning performance, and can meet the process requirements during the processing, reduce tool loss, reduce the temperature and roughness of the processing surface, etc. Therefore, the selection of cutting fluid should follow the following principles: First of all, the cutting fluid shall meet the requirements for rust prevention between work procedures and shall not corrode the work pieces. It shall also meet the requirements of equipment lubrication and protection management. In other words, the cutting fluid cannot leave hard colloidal deposits on the guide rail of the CNC machining center, so as to ensure the safety and normal operation of the equipment used. In addition, the coolant selected for CNC machining center shall be free of irritating smell and harmful additives to ensure the safety of users. It also has a good waste liquid treatment method to minimize the impact on the surrounding environment. In terms of service performance, it is necessary to adapt to various processing methods and cooling of various workpiece materials as much as possible, in addition, it should have a long service life. In terms of tools, the production is more smooth. Improve cutting speed and tap more productivity in production. The tool wear is reduced. Reduce the local temperature generated by high temperature during machining, and extend the tool life. Reduce tool replacement frequency and tool consumption. Improve quality stability and reduce the generation of waste reduction parts. Improve the surface finish of parts, improve the quality of parts, and improve the market competitiveness of products. What machine tool uses the center? The types of machine tools that can provide modification services for the spindle water outlet system of the machining center: vertical machining center, machining center, gantry machining center, CNC inclined lathe The internal cold drill and central high-pressure fuel injection are used for deep hole machining of parts, and the production efficiency and finish are further improved. The device has higher use efficiency and more convenient maintenance. Any enclosed machining center and turning and milling center can be connected.

The multi-stage centrifugal pump is a vertical structure with a small floor area. The center of gravity of the pump coincides with the center of the pump foot, so it runs stably, has small vibration and long service life

characteristic 1. The multi-stage centrifugal pump is a vertical structure with a small floor area. The center of gravity of the pump coincides with the center of the pump foot, so it runs stably, has small vibration and long service life. 2. The multi-stage centrifugal pump has the same caliber and is on the same horizontal centerline. It can be directly installed in any part of the pipeline without changing the pipeline structure, which is very convenient for installation. 3. The motor plus rain cover can be directly placed outdoors for use without building a pump house, which greatly saves capital investment. 4. The lift of multistage centrifugal pump can meet different requirements by changing the pump stages (number of impellers), so it is widely used. 5. The shaft seal adopts cemented carbide mechanical seal, which is reliable without leakage and has small mechanical loss. 6. High efficiency, energy saving and beautiful appearance. 7. Note: Internal casting with diameter above 50 is formed.

液壓卡盤在日常的應用中壓力不能太大也不能太小，太大容易導致內部配件斷裂，太小則會導致夾不緊工件。 所以我們?nèi)粘Ｔ谑褂玫倪^程中壓力到底是調整到多大才比較適合呢， 一般來講我們液壓卡盤內部配件承受壓力極限為3.5Mpa 所以液壓卡盤壓力4-18寸之間壓力不超過2.5Mpa最為適合， 使用加高爪時候則壓力需要調整到原有的一半比較適合了。

液壓卡盤和油壓卡盤區別是什么，油壓也成為液壓，所以液壓卡盤和油壓卡盤指的是同一個東西，哪一種卡盤精度好？其實這個要看你用途而定，如果單卡盤精度氣動卡盤精度是最好的，目前最好的可以打到0.5um但是其夾持力很弱。所以目前使用較廣的為液壓卡盤，就是油壓卡盤

齒輪采用具有國際九十年代先進水平的新技術--雙圓弧正弦曲線齒型圓弧。它與漸開線齒輪相比